Instructions for making BEAT 900 update disks
Each of the Disk icons contains a "zipped" copy of the files for each
Update disk (1 ~ 4) To make a disk:
- Make a label with the proper update number that matches the icon
(file), and apply it to a Blank, DOS formatted 3.5" floppy disk.
- Insert the floppy disk in the A:\ drive.
- Double click on the corresponding Disk Icon (file.) The program
will automatically un-zip the files and write them to the disk.
- Repeat steps 1 ~ 3 for the remaining 3 disks for a total of 4
disks.
BEAT 900 ZN
Software version 2.02 Rev 20
EZN Disk 1
EZN Disk 2
EZN Disk 3
EZN Disk 4 MK5 Trimmer
BEAT 900 YS
Software version 2.02 Rev 20
EYS Disk 1
EYS Disk 2
EYS Disk 3
EYS Disk 4 MK4 Trimmer
EYS Disk 4 MK5 Trimmer
BEAT 900 YN
Software version 2.02 Rev 20
EYN Disk 1
EYN Disk 2
EYN Disk 3
EYN Disk 4 MK5 Trimmer
<Mk4 trimmers have special instructions:>
Special note about BEAT 900 YN machines with Mark 4 trimmers:
The YN software when loaded, automatically sets the machine to Mark
5 trimmers. Therefore you have to manually change the trimmer type to
Mark 4 trimmer. This has to be done whenever software is loaded or if a
Software Reset is done.
Instructions for changing trimmer type:
- From the BEAT System screen, select "Settings"
- While holding down the "CTRL" and ALT" keys, press the "B" key.
The screen should change on the top.
- Select "Machine"
- Click on Machine Type to change to "Mark 4" trimmer.
- Select "OK"
- Select "File" "Exit"
- Select "File" "Quit"
- Select "Yes" to save changes.