|
Each frame is comprised of a two-part high quality
precision molded industrial plastic frame, and interchangeable mounting
clips that attach to the tubular arms. The type of clips needed depends
on the frame, the distance between arms, and the type of connecting
clips. Frames can be ordered complete, or the components ordered
individually. The information below is provided to help determine which
parts to order.
|
|
|
|
|
|
|
|
|
|
Clip Type - QS
|
Barudan introduced the new "QS" new attachment
clips in 2001. Made from stainless steel, these clips provide stronger
retention, yet are easier to install and remove from the
machine. The clip for the right hand side has a single hole, the
clip for the left has a slot.
|
|
EFP
|
Introduced with Barudan's Tubular system, the EFP clips can be
identified by the "V" shaped cutout on the right side clip.
|
|
BALL
|
Mounting clip installed on some domestic USA machines, and many machines
sold in South America. <PLEASE CALL YOUR DISTRIBUTOR TO ORDER THIS
TYPE HOOP>
|
|
Field - 520
|
This is the distance between the arms. The 520mm spacing (approximately
20") is on most 1-6 head Barudan machines, and some larger models.
The Barudan Elite, Elite XL & Elite Pro single head machines have 520 spacing
|
|
450 |
450mm (approx 17.75") head spacing found on a few large (12-15 head)
machines. |
|
380
|
380mm (approx. 15") head spacing is typically found on larger
Barudan multihead machines.
|
|
Head- Bridge
|
Barudan embroidery machines with Bridge heads (also called beam or
portal machines) can accommodate larger hoops (front-to-back.) These
models are identified by an "HE" in the model name: BENYHE,
for instance, and include the new "C02" thru "C08"
series.
|
|
Arm
|
The "Arm" style sewing heads are the traditional style, single
piece sewing heads. The head limits the frame travel, so some of the
larger oblong frames will not fit. Arm type machines include the BENT
"Elite" and the "ME" series machines (BENSME/BENYME)
|
