ID: KB01015 

Reference: Lubrication chart for BEDT-ZN-101 (Elite Jr.) machines

The information in this article applies to the following product:

SUMMARY

This document shows the locations and service intervals for lubricating the BEDT-ZN-101 "Elite Jr" machine. This information has been updated since the first machine shipments.

NOTE:

For easier printout and storage on a computer, this information is also available in an Adobe Acrobat file:

                        BEDT OPERATION MANUAL CHAPTER 6: Machine Care

 

VIEW OF UPPER HEAD

VIEW OF LOWER HEAD

 

BEDT-ZN-101 (Elite Jr) LUBRICATION CHART

PART ID

LUBRICANT

FREQUENCY
A1  Rotating Hook  Barudan machine oil or 
Clear (mineral) oil for sewing machinery		 Every 4 to 6 hours
B1  Drive Shaft Barudan machine oil or 
Clear (mineral) oil for sewing machinery

*Wipe lightly with cotton swab saturated in oil.

 Once a week
B2 Hook Shaft Bushings (2) 
B3 *Needle Bars 
C1  Needle Bar Crank Rod Bearing oil Once a week
C2 Take-up Drive Lever 
C3 Needle Bar Drive Lever
C4 Needle Bar Drive Links (2)
C5 Needle Bar Driving Block
C6 Needle Bar Driving Shaft
E1 Take-Up Lever  Lithium grease spray Every 3 months
E2 Take-Up Lever Cam Groove
E3 Presser Foot Cams (2)
F1  Lower Connecting Gear  Wheel bearing grease 
(access by removing the left side head cover)		 Every 6 months

Additional query words:

Keywords : TES Training
Issue type : kbinfo
Technology : digitizing
Updated: 10/27/2006