Barudan America's technical staff has prepared articles on a wide range
of topics for servicing and getting the most from your Barudan machine.
NOTE: Items marked with this symbol are publications prepared with Adobe
Acrobat. You will need Acrobat Reader installed on your computer to read
these. You can either read this on your computer, or print them.
To save these files to your hard disk, right-click on the blue link,
select "Save Target As," and choose a directory on your
computer.
Installation:
KB01002: Procedure: Cart Assembly for
Single Head Machines
(applies to BENT and B2000 machines; also available in
Adobe Acrobat format as a tech library article
TL02001)
KB010028: Adapting 3phase machines
to run on Single Phase
(applies to large machines- 12 head and up)
Software & Utilities:
TL04001: CF Write Version 1.2
This software writes embroidery files to CF Cards used by "D" series
machines.
KB01025: Format CF Cards for FAT not
FAT32
To work with D series machines, CF Cards must be formatted as FAT, not
FAT32.
Maintenance:
KB01001: Procedure: Needle Depth
Adjustment, ZN/ZQ heads
(applies to BENS, BENY, BENR, BENB multihead, and
ELITE single head machines)
KB01014: Reference: Fuse Locations and
Replacement Chart for Zig-Zag Machines
(applies to Barudan B2000 and all Meistergram models)
KB01015: Reference: Oiling & Lubrication
chart for BEDT-ZN-101 (Elite Jr.) machine
(applies to Barudan BEDT-ZN-101 "Elite Jr." machine)
KB01023: Reference: Oiling & Lubrication
chart for BEDT-ZQ-501 (Elite Pro) machine
(applies to Barudan BEDT-ZQ-501 "Elite Pro" machine)
TL02010: Elite
Pro Lubrication Instructions (acrobat 5
PDF file- 3.4meg for printing)
TL02010A:
Elite Pro Lubrication Instructions (for web viewing)
(acrobat 7 PDF file- 1.2 meg)
An 18 page color illustrated guide for proper
lubrication of a Barudan Elite Pro single head machine
(applies to Barudan BEDT-ZQ-501 "Elite Pro" machine)
Note: the first version has hi-resolution graphics for best quality
printing, and requires Adobe Acrobat Reader 5 or higher. The second
version is optimized for web viewing, with Acrobat Reader 7 or higher.
TL02011: Elite
XL Lubrication Instructions (acrobat 5
PDF file- 3.4meg for printing)
TL02011A:
Elite XL Lubrication Instructions (for web viewing)
(acrobat 7 PDF file- 1.9 meg)
A 17 page color illustrated guide for proper
lubrication of a Barudan Elite XL single head machine
(applies to Barudan BEDT-ZN-101 "Elite XL" machine)
Note: the first version has hi-resolution graphics for best quality
printing, and requires Adobe Acrobat Reader 5 or higher. The second
version is optimized for web viewing, with Acrobat Reader 7 or higher.
Sewing & Embroidery Advice:
(Sizing and needle selection apply to BENS, BENY, BENT machines, but
placement and backing selection may be used as a reference for B2000)
KB01003 Technique - Sewing: Placement
Chart
KB01004 Technique - Towels: Embroidery
Placement and Framing
KB01005 Technique - T-Shirts: Embroidery
Placement and Framing
KB01006 Technique - Blankets: Embroidery
Placement and Framing
KB01007 Technique - Brief Case/Tote:
Embroidery Placement and Framing
KB01008 Technique - Sheets: Embroidery
Placement and Framing
KB01009 Technique - Sweatshirts &
Sweaters: Embroidery Placement and Framing
KB01010 Technique - Jackets: Embroidery
Placement and Framing
KB01011 Technique - Caps: Embroidery
Placement and Framing
KB01012 Technique - Polo Shirts:
Embroidery Placement and Framing
B2000 and Meistergram Font Information
KB01016 Procedure: Using keyless disks
on Meistergram machines
(applies to all M900, all M800 & M700 Floppy Disk Upgrade
machines)
KB01022: Fonts included with the B2000
Machine
Lists the fonts included with the B2000 machine
TL01002:
Font Instruction Sheets for 10 fonts included with B2000
Instruction sheets for the 10 fonts included with the
B2000 machine. These instructions were supplied by font vendor and the quality
is beyond Barudan's control
TL01001: Help File for Zig-Zag Fonts
(B2000, M2000, M900, M800 & M700)
TES Information
KB01024 Information: TES Monogram Font
Codes
Keystrokes for selecting monogram letters in TES
Monogram fonts
KB01027 Information: Increasing
Comm Port Speed on TES3
Adjusting the down Comm port speed for faster downloads
from TES3 to embroidery machines
Publications:
TL02001: Single Head
Machine Cart Assembly Instructions 1.4 MB, applies
to BENT and B2000 machine carts
TL02002: UG-Type Sewing
Head Manual 230 KB, applies to 7 needle, single
take-up lever, turret (round) head used on BESR & BEAT-700 machines
TL02003: YS E-Type
Sewing Head Manual 403 KB, applies to 7 needle,
individual take-up lever, turret (round) head used on BEMS, BEMR &
BEAT-800 machines
TL02004: YN E&A-Type
Sewing Head Manual 340 KB, applies to 9 needle,
individual take-up lever, turret (round) head used on BEMS, BEMR, BENY,
BENS & BEAT-900 machines
TL02005: ZN-type Sewing
Head Manual 259 KB, applies to 9 needle, individual
take-up lever straight head used on BENY, BENS, BENT, BEAT-900 machines
TL02006: ZQ/ZN-A
Arm-Type Sewing Head Manual 230 KB, applies to 9 &
15 needle, individual take-up lever straight head used on BENY, BENS,
BENT, BEAT-900 machines
TL02008: TES Font Brochure
3.013 MB, applies to all levels of Version 2 TES
software. This file contains a list and samples of all fonts included
with all levels of TES software.
TL02009: Elite Pro Training CD Addendum 488 KB. The
installation and training CD for the Elite series machines was filmed
using an Elite Jr. machine. This booklet covers the differences, in
installing the thread stand, threading the machine, installing the pivot
shaft bracket, and includes an oiling chart and diagram.
Frames & Accessories:
TL03001: Barudan Frames
For Tubular Machine, with Part Numbers
Lists the Barudan frames for Tubular machines, provides
part numbers, and discusses the various types and options.
We offer telephone and on-site technical support in the United States.
Contact us at:
- (440) 498-3660
Monday - Friday, 8:30 a.m. to 5:00 p.m., ET
- (440) 498-3656 (Fax)
